Welding & Fabricating Technology, AAS

General Education Requirements - 16 credits

• EDT 11000 Detailing w/AutoCAD 3 cr.

•  

• ENG 10303 English Composition I 3 cr.
• or   ENG 11800 Intro Technical & Prof Writing 3 cr.

•  

• MTH 07300 Basic Algebra 4 cr. or prerequisite met by placement testing. (0-4)

•  

  Select any science course. 3-5 cr.

   

  Select any speech course. 3 cr.

•  

• WLD 10401 Material Science 4 cr.

Occupational Requirements - 50 credits

• EDT 11000 Detailing w/AutoCAD 3 cr.
• WLD 10401 Material Science 4 cr.
• WLD 10501 Welding Fabrication Level 1 3 cr.
• WLD 11000 Welding Fundamentals 4 cr.

•  

• WLD 11101 GMAW, FCAW & SMAW x-Block 1 cr. and
• WLD 11102 GMAW, FCAW & SMAW-Horizontal 1 cr. and
• WLD 11103 GMAW, FCAW & SMAW-Vertical 1 cr. and
• WLD 11104 GMAW, FCAW & SMAW-Overhead 1 cr. and
• WLD 11105 WPQR Test-SMAW 1 cr.

• Note: WLD-11100 may be used in place of modules 1-5 if previously completed. (4 cr)

•  

• WLD 11201 GMAW-Constant Voltage 1 cr. and
• WLD 11202 GMAW-Spray 1 cr. and
• WLD 11203 GMAW-Pulse 1 cr. and
• WLD 11204 GMAW-Aluminum 1 cr. and
• WLD 11205 WPQR Test-GMAW 1 cr.

• Note: WLD-11200 may be used in place of modules 1-5 if previously completed. (4 cr)

•  

• WLD 11300 Non-Destructive Testing 3 cr.
• WLD 11400 Fabrication Blueprint Reading 1 cr.

•  

• WLD 21201 GTAW-Flat 1 cr. and
• WLD 21202 GTAW-Horizontal 1 cr. and
• WLD 21203 GTAW-Vertical 1 cr. and
• WLD 21204 GTAW-Overhead 1 cr. and
• WLD 21205 WPQR Test-GTAW 1 cr.

• Note: WLD-21200 may be used in place of modules 1-5 if previously completed. (4 cr)

•  

• WLD 21301 Flat & Horizontal Pipe Welding 1 cr. and
• WLD 21302 5G-Up Pipe Welding 1 cr. and
• WLD 21303 5G-Down Pipe Welding 1 cr. and
• WLD 21304 6G-Up Pipe Welding 1 cr. and
• WLD 21305 Pipe Fitting 1 cr.

• Note: WLD-21300 may be used in place of modules 1-5 if previously completed. (4 cr)

•  

• WLD 21400 Welder Qualification Testing 4 cr.
• WLD 21501 Welding Fabrication Level 2 5 cr.

• Note: WLD-21500 may be used in place of WLD-21500 if previously completed (4 cr)

• WLD 29900 Welding Internship 3 cr.
• Electives if needed for total hours: 0-4 cr.

AAS Program Credits: 64

Suggested sequencing of courses—Fall start:

Suggested sequencing of courses—Winter start: